What kind of device do you need for WLAN?

What kind of device do you need for WLAN?

The RG-6 and RG-59 What kind of hardware is required to join two network segments, such as a wireless network and a wired network? Bridge Which physical topology employs a centralized device to handle network traffic? The star bus Is the following statement true or false: A WLAN is made up of numerous smaller networks that cover a vast geographical region. False! A WLAN is based on the concept of radio coverage areas and allows devices to communicate over short distances by connecting them to one or more access points. Access points serve as hubs for WLANs by providing connections to other networks or the Internet.

An access point has a limited number of ports that are used to connect other devices to the WLAN. An access point cannot be used as a firewall because it has no direct connection to the external network. It can only connect other devices through other devices such as routers.

A router is a device that connects two or more networks together. It allows devices on different networks to communicate with each other via a common connection. A router is needed when multiple subnets exist on separate networks without any way of knowing about each other. For example, one part of a building may have its own network with dedicated IP addresses while another part uses the same network as the office next door. A router is used to connect the two networks so that they can share resources like printers and servers. Without a router, each subnet would be isolated from each other and could not communicate except through a gateway device such as a switch or a computer.

What type of device do you need if you want to connect two network segments?

This set has 35 cards.

A WLAN covers a large geographical area and is made up of many smaller networks.False
What type of device do you need if you want to connect two network segments together such as a wireless network and a wired network?bridge

Which device is used in wireless LAN?

A bridge can be used to connect networks of various sorts. A wireless Ethernet bridge allows devices on a wired Ethernet network to connect to a wireless network. The bridge serves as the wireless LAN's connecting point. Devices on the wired network think they are connected to a single wireless network resource (access point), when in fact they are connected to two (or more) separate resources - one for each network.

What is the difference between WLAN and Ethernet?

WLAN devices deliver data using high-energy radio frequency waves. Electric signals are used by Ethernet LAN devices to transport data. Space is traversed by radio frequency waves. As a result, no physical connection is required between the devices connected to the WLANs. This method of communication is called "Radio Frequency (RF) Communication."

Ethernet technology was originally designed for use in local area networks (LANs). It allows computers to communicate with each other over long distances through multiple hubs or switches. The Ethernet standard calls for devices to send messages over a network using frames. Each frame is made up of eight 8-bit characters referred to as octets. A special character called a flag character is used to indicate the start and end of a frame.

Ethernet frames can be either broadcast or unicast. A broadcast frame is sent out simultaneously to all devices on the network, whereas a unicast frame is sent to a single device. When a device receives a broadcast frame, it ignores the message and moves on to the next one, while any unicasted frame that it receives is processed by the device. Broadcast messages are useful for sending system updates to all devices on the network, while unicast messages can contain user information sent from one device to another.

Ethernet frames can be further divided into two types: destination address (DA) packets and source address (SA) packets.

About Article Author

Richard Owens

Richard Owens is a techie who knows about electronic devices and internet. He loves to help people with their tech needs, whether it’s an update or something more complicated. He has been working in the technology field for over 30 years, but he never seems to get bored of learning new things! Richard will come up with creative ways to make your life easier by using all of this knowledge.


TheByteBeat.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Related posts